사이트 로그인
2026.01.05 06:47
If you can't locate a fuse in your light fixture, it is probably a modern unit that does not have a fuse. Many fashionable vehicles use disc brakes on all 4 wheels. Use a T30 Torx driver to remove the Torx screw from the front of the rotor. Reinsert and free online slots tighten the two retaining bolts with the 14mm triple square driver. Use a 14mm triple sq. driver to remove the two bolts holding the caliper bracket to the hub.
Place the caliper over the brand new brake pads within the caliper bracket Casino slots and screw in the caliper bolts by hand. Pry the brake pads unfastened from the caliper bracket with a slotted screwdriver. The caliper bolts are situated on the again aspect of the caliper, Casino Slots near the outer edge. Place the jack beneath the body within the again of the Mercury and raise the rear-end of the SUV. Raise the automobile off the bottom with a ground jack and secure the car with jack stands.
Remove the jack stands and Casino slots decrease the car to the ground. Keeping your brakes in form is very important for maintaining the safety and braking performance of your 2008 Volkswagen Jetta 2.5. So as to repair and exchange the Jetta's brakes, the wheels have to be eliminated and Online slots the parts removed from the automobile. Tighten the nuts by hand online Slots before decreasing the vehicle. If you're installing a spin-on filter, screw it into place by hand till it's seated firmly against the engine. Screw the oil cap into place by hand.
Screw the oil filter cowl bolts into place, using a ten mm socket or a 5 mm Allen wrench. Use a torque wrench to tighten the lug nuts to ninety foot-pounds. Tighten the bolts to 7.6 foot-pounds, using a torque wrench. Use a 13 mm wrench to take away the two caliper slide bolts. Locate the caliper guide pins. These pins consist of a 13mm bolt and Slots online a 16mm nut in between.
Use one mixture wrench to carry the 16mm nut whereas working the 13mm bolt unfastened with a second mixture wrench.
Use a brake service kit with the appropriate adapter to twist the brake caliper piston back inside of the caliper housing. The highest of the spool has tabs that hook into the outer housing. Place a funnel into the engine's filler neck, located on top of the suitable engine crankcase cowl. Find the spark plug together with the engine assembly under the hood. Shut the mower's engine hood. If the oil stage is under the dipstick's decrease mark, pour 1 to 2 oz.
of engine oil into the oil tank or free slots the engine. Insert the dipstick into the oil tank or engine till the cap's threads are resting on the oil filler neck.